I have the Toyo Open Country M/T's at 35x12.5 and they rub on the plastics a bit on the front. I had to completely remove the front 'mud flaps' because they rubbed pretty hard on those. Don't think you'll be able to run those with just the 3/1, bu...
ok my TOYTEC 3/1 is in the mail, so now what should i get for tires? i have always liked BF's and figured on putting the 305/65/18 A/T's on TRD rims but a buddy told me he loves the TOYO's M/T's (would be 275/70/18 ) and that they blow away the BF...
i am about to add the toytec 3/1 and from what i understand the standard shock is fine. little better quality ride with the bilstein i bet but i am cheap and trying to do economy upgrade. good luck bro...
zip= 23454 as far as tire size that's why i asked. i heard that this tire would fit but you would have to trim skid plate just slightly. if you don't believe it will fit, what size would you recommend speaking from experience (want as close to 33"...
I hear ya.
I'm not exactly sure if that tire will fit, I think there is to much height without any backspacing will cause rubbing issues.
Yes, you should try your local shop for install.
We do have some local shops that have installed our gear, w...
i have a DC 09 TRD 4x4 and love it. looking to put the TOYTEC level kit 3/1 with diff. drop and install 305/65/18 ATs on stock TRD rims. will these fit and should i use my dealer or local off-road shop for install? does it even matter other than p...
just a heads up: if your a taller guy make sure you fit in the seat with room to spare over your head. most of the crewmax's have a sunroof and if your 6'1" or better they are to small so just look at that clearance. i had to order a DC just becau...
soak it with lighter fluid and let if sit for a few then use some safety wire or fishing line and will cut like butter! (may not even need any line, since this is a thin emblem)
i had a westin (larger tube) full wrap brush guard and hit 4 deer with it and only bent a corner into the quarter panel when i hit one in the butt with the edge of the guard. hit them square and about any real brush guard will beat a under200 lb d...
mike,
if they replace them do what i always do with a new truck. Buy a few cans of rubber coating (i use 3M from walmart @ $7 can) and cover the back side of those bumpers with it. The outside of bumpers usually hold up great but the backside with...